Model:WTJ-75

3 month guarantee ( industry use )​

Main Parameter :

• Capacity : 7.5kg
• Size : 410*230*320mm
• Boiler Wattage : 1000w
• Steam Pressure : 3.5Bar
• Boiler Capacity : 1.8L

Features:

• Temperature is automatically controlled heat indicator light
• Electric steam irons
• Specially designed soleplate that prevent water leak
• Compact design with fast steam built-up
• Suitable for small garment factories, sample makers and laundries
• Usage of up to 3 hours for each water refill

Operate Steps:

1. Let cool if necessary, and unscrew the cap. Fill the boiler and replace the cap.
2. Open the indicator switch.  After a few minutes, the central indicator light on the dial will light up to signal the boiler is ready for steam ironing.
3. Turn the dial on the iron to the type of  fabric to iron .The thermostat will adjust the temperature  so that it is right for correct ironing .
4. Press the red micro-switch for steam ironing .
5. When the boiler runs out of water the central indicator light remains on but no more steam will come out of the iron.  To resume ironing it will be necessary to  wait 20-25 minutes  for the boiler to cool before you can fill it with water again .

Attentions:

1. When filling with water : use normal tap water, without liquids and pour it slowly through the funnel.  Any scale will deposit on the bottom will clog the steam holes and stains the fabric. It will only be necessary to clean the boiler after several years to remove the scale on the bottom.
2. Never leave the iron on when you are not using it or when it is hot .
3. When you fill the boiler unplug the iron .